Home  
   

DALI


DALI - fluorescent dimming

 

Any dimming method used for dimming fluorescent fittings will require special "control gear" in the light fittings to support it. 

 

One dimming standard is DALI.

 

Instead of using a C-Bus output to control a load,  the load has a DALI control gear in the fitting and is connected to a DALI network. 

A C-Bus > DALI gateway ( 5502DAL ) is used to send control signals to the DALI network.

 

The DALI control gear is configured by a seperate software utility ( supplied by the DALI control gear manufacturer ) and is configured by the installer. 

 

The DALI Gateway allows C-Bus to send On/ Off and dimming "level" control signals to the DALI control gear.

 

Special Outputs installation instructions

 

Training notes/programming information for DALI gateways.