0-10volt - Fluorescent Dimming
Any dimming method used for dimming fluorescent fittings will require special "control gear" in the fittings.
One of the older dimming control methods for fluorescent fittings still available is 0-10 volt dimming (sometimes called 1-10 volt).
0-10 volt control gear has additional terminals on it marked "1" and "10" , depending on the voltage present at the terminals the lamp will increase or decrease in light intensity.
Details are included below on 0-10 volt dimming using C-Bus Lighting controls.
C-Bus 0-10 volt dimming
Special Outputs installation instructions
|