C-Bus Dimmers, PRO series
Specification Chart
All PRO series dimmers have a built-in 60mA C-Bus power supply.
Please read the instructions for these units, as their physical dimensions are much larger than the DIN series dimmers and will not fit into a DIN Mount enclosure. All PRO series dimmers must be installed in locations with adequate "free air" ventilation to aid in heat dissipation.
The unit design is suitable for single (1) phase connection only, the design does not support three (3) phase connection.
Dimmers - PRO Series
4 channel ( Each Channel = 5 Amp / 1200 VA ) instructions for all models
L5104D5
2 channel ( Each Channel = 10 Amp / 2400 VA )
L5102D10
1 channel ( Each Channel = 20 Amp / 4800 VA )
L5101D20
| 
