For connecting "voltage free" actuators / switches to a C-Bus network
These C-Bus devices have connections that an external "voltage free"
contact can be wired to.
5 Vdc is supplied to these connections (sourced from the C-Bus network),
the device then monitors the external circuit for open or closed states.
The device can be programmed to operate as a standard series C-Bus
input ( ie: 5034NL )
Each version allows for 4 inputs to be connected to it.
Bus Coupler - 5104BCL
DIN Mount - L5504AUX
Bus Coupler instructions
DIN Mount instructions
2 Input Bus Coupler
This unit is similar to the 4 Input unit but only supports 2 inputs. The other 2 connections are used for controlling small Leds to provide indication at the wall switch of the state of the controlled Group Address.
5102BCLEDL
| 
