These units provide input commands to C-Bus when triggered by other factors such as time of day, temperature or ambient light level.
C-Bus Thermostats
5070THB Series C-Bus Single Zone Thermostat
Installation, User's Guide
5070THP Series C-Bus 4 Zone Thermostat
Installation, User's Guide
Temperature
This unit can be programmed to send on /off commands to C-Bus depending on the ambient temperature. The Sensor is a Wall plate type unit.
5031TS instructions
Light Level
This unit can be programmed to send on/ off/ ramp commands to C-Bus depending on the current ambient light level. The Sensor is a Wall plate type unit.
5031PE instructions
Light Level sensor is also available in an IP56 weatherprooof version as a
special order. Sensor is supplied in a Clipsal 56E1 enclosure.
5031PEWP,GY installation instructions not available.
2 Channel Time Clock
This unit can be programmed to send on/ off commands to C-Bus depending on the current time of day. It supports 42 on or off events to either channel.
It will control up to 2 group addresses. Time clock is a Wall plate type unit.
5031H2TC7 ( horizontal mounting ) instructions for both models
5031V2TC7 ( vertical mounting )
| 
